Enable 802.1X; Disable 802.1X - D-Link DGS-1210/ME Series Reference Manual

Command
guest_vlan
create 802.1x user
show 802.1x user
delete 802.1x user
config 802.1x capability
ports
Each command is listed in detail, as follows:

enable 802.1x

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable 802.1x switch wide:
DGS-1210-28MP/ME:5# enable 802.1x
Command: enable 802.1x
Success.
DGS-1210-28MP/ME:5#

disable 802.1x

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable 802.1x on the Switch:
DGS-1210-28MP/ME:5# disable 802.1x
Command: disable 802.1x
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Parameter
<username 15>
<username 15>
[<portlist> | all] [authenticator | none]
To enable the 802.1x server on the Switch.
enable 802.1x
The enable 802.1x command enables the 802.1x Port-based
Network Access control server application on the Switch.
None.
Only Administrator, operator or power user-level users can issue this
command.
To disable the 802.1x server on the Switch.
disable 802.1x
The disable 802.1x command disables the 802.1x Port-based
Network Access control server application on the Switch.
None.
Only Administrator, operator or power user-level users can issue this
command.
368