Show Log_Save_Timing; Show Log - D-Link DGS-1210/ME Series Reference Manual

show log_save_timing

Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To show the login banner:
DGS-1210-28MP/ME:5# show log_save_timing
Command: show log_save_timing
Saving log method: time_interval
DGS-1210-28MP/ME:5#

show log

Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To show the log index 1 on the Switch:
DGS-1210-28MP/ME:5# show log index 1
Command: show log index 1
Index Time
----- -------------------- ------------------------------------------
1 Jan 1 00:00:16:SYSTEM-6:Side Fan is in low speed.
DGS-1210-28MP/ME:5#
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Used to show the log save timing.
show log_save_timing
This command allows display of the log save timing on the Switch.
None.
None.
Interval : 100
Used to show the log.
show log {index <indexlist> | module <string 32> | severity
[warning | all | informational]}
This command allows display the log.
index <indexlist> – Specifies the index of logs to be displayed.
module <string 32> – Specifies the module of logs to be displayed.
severity [warning | all | informational] – Specifies the severity of logs
to be displayed.
None.
Log Text
420