Disable Erps; Create Erps Raps_Vlan; Config Erps Raps_Vlan Ring_Mel - D-Link DGS-1210/ME Series Reference Manual

disable erps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable ERPS:
DGS-1210-28MP/ME:5# disable erps
Command: disable erps
Success.
DGS-1210-28MP/ME:5#

create erps raps_vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an R-APS VLAN with aVLAN ID of 4094:
DGS-1210-28MP/ME:5#DGS-1210-28MP/ME:5# create erps raps_vlan 4094
Command: create erps raps_vlan 4094
Success.
DGS-1210-28MP/ME:5#DGS-1210-28MP/ME:5#

config erps raps_vlan ring_mel

Purpose
Syntax
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Used to disable the ERPS function on a switch.
disable erps
The disable erps is used to disable the ERPS function on a switch.
None.
Only Administrator, operator and power user-level users can issue
this command.
Used to create an R-APS VLAN on the switch. Only one R-APS
VLAN should be used to transfer R-APS messages.
create erps raps_vlan <vlanid 1-4094>
The create erps raps_vlan is used to create the R-APS VLAN on
the switch. There should be only one R-APS VLAN used to transfer
R-APS messages. Note that the R-APS VLAN must already have
been created by the create vlan command. This command can only
be issued when this ring is disabled or ERPS is global disabled.
<vlanid 1-4094> - Specify the VLAN ID that will be the R-APS VLAN.
Only Administrator, operator and power user-level users can issue
this command.
Used to configure the ring MEL for an R-APS VLAN.
config erps raps_vlan <vlanid 1-4094> ring_mel <value 0-7>
236