Show Private_Vlan; Config Gvrp - D-Link DGS-1210/ME Series Reference Manual

Success.
DGS-1210-28MP/ME:5#

show private_vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the private VLAN information for VLAN ID 2:
DGS-1210-28MP/ME:5# show private_vlan vlanid 2
Command: show private_vlan vlanid 2
Primary Vlan ID: 2
------------------------------------------
Promiscuous Ports :
Community Ports : 1-28
Total Entries : 1
DGS-1210-28MP/ME:5#

config gvrp

Purpose
Syntax
Description
Parameters
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To display private VLAN information on the Swtich.
show private_vlan {vlan <vlan_name 32> | vlanid <vlanid_list>}
The show private_vlan command is used to display private VLAN
information on the Swtich.
<vlan_name 32> − Specifies the name of the private VLAN to be
displayed.
vlanid <vlanid_list> − Specifies the VLAN ID of the private VLAN to
be displayed.
Only Administrator and Operator and Power-User-level users can
issue this command.
Community VLAN: 1
To configure configures the Group VLAN Registration Protocol on
the Switch. The user can configure ingress checking and acceptable
frame tagged only, the sending and receiving of GVRP information,
and the Port VLAN ID (PVID).
config gvrp [<portlist> | all] [state [enable | disable] |
ingress_checking [enable | disable] | acceptable_frame
[Tagged_Only | All_Frames] | pvid <vlanid 1-4094>]
The config gvrp command configures the Group VLAN Registration
Protocol on the Switch. The user can configure ingress checking and
acceptable frame tagged only, the sending and receiving of GVRP
information, and the Port VLAN ID (PVID).
<portlist> − A port or range of ports for which to configure GVRP.
all − configure GVRP on ports.
state [enable | disable] - enable and disable GVRP
ingress_checking [enable | disable] − Enables or disables ingress
263