Show Ethernet_Oam Ports - D-Link DGS-1210/ME Series Reference Manual

Restrictions
Example usage:
To show Ethernet OAM configuration of port 1:
DGS-1210-28MP/ME:5# show ethernet_oam ports 1 configuration
Command: show ethernet_oam ports 1 configuration
Port 1
-----------------------------------------------------------
OAM
Mode
Dying Gasp
Critical Event
Remote Loopback OAMPDU
Symbol Error
Notify State
Window
Threshold
Frame Error
Notify State
Window
Threshold
Frame Period Error
Notify State
Window
Threshold
Frame Seconds Error
Notify State
Window
Threshold
DGS-1210-28MP/ME:5#

show ethernet_oam ports

Purpose
Syntax
Description
Parameters
Restrictions
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
displayed.
None.
Used to display for Ethernet OAM statistics.
show ethernet_oam ports [<portlist> | all] statistics
The show ethernet_oam ports command is used to show port's
Ethernet OAM statistics information.
[<portlist> | all] − Specifies a port, a range of ports or all ports to be
displayed.
None.
: Enabled
: Active
: Enabled
: Enabled
: Processed
: Disabled
: 1000 milliseconds
: 100 Errored Symbol
: Enabled
: 1000 milliseconds
: 1 Errored Frame
: Enabled
: 148810 Frames
: 1 Errored Frame
: Enabled
: 60000 milliseconds
: 1 Errored Seconds
310