Enable Asymmetric_Vlan; Disable Asymmetric_Vlan - D-Link DGS-1210/ME Series Reference Manual

Description
Parameters
Restrictions
Example usage:
To define VLAN Trunking:
DGS-1210-28MP/ME:5# config vlan_trunk ports all state enable
Command: config vlan_trunk ports all state enable
Success.
DGS-1210-28MP/ME:5#

enable asymmetric_vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable Asymettric VLAN on the switch:
DGS-1210-28MP/ME:5# enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DGS-1210-28MP/ME:5#

disable asymmetric_vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable asymmetric_vlan on the switch:
DGS-1210-28MP/ME:5# disable asymmetric_vlan
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
The config vlan_trunk ports command configures the VLAN
trunking port settings on the Switch. The user can enable VLAN
Trunking and define ports to be added to the VLAN Trunking
settings.
[<portlist> | all] − A port, range of ports or all ports for which to
configure VLAN Trunking.
state [enable | disable] − enable and disable VLAN trunking.
Only administrator or operator-level users can issue this command.
To enable Asymmetric VLAN on the switch.
enable asymmetric_vlan
The enable asymmetric_vlan command, along with the disable
enable asymmetric_vlan command below, is used to enable and
disable Asymmetric VLAN on the Switch.
None.
Only administrator or operator-level users can issue this command.
To disable Asymmetric VLAN on the switch.
disable asymmetric_vlan
The disable asymmetric_vlan command, along with the enable
asymmetric_vlan command below, is used to disable and enable
Asymmetric VLAN on the Switch.
None.
Only administrator or operator-level users can issue this command.
272