Enable Snmp Firmware_Upgrade_State Traps; Disable Snmp Firmware_Upgrade_State Traps - D-Link DGS-1210/ME Series Reference Manual

Description
Parameters
Restrictions
Example usage:
To disable SNMP IMPB violation traps support on the Switch:
DGS-1210-28MP/ME:5# disable snmp IMPB_violation traps
Command: disable snmp IMPB_violation traps
Success.
DGS-1210-28MP/ME:5#

enable snmp firmware_upgrade_state traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SNMP firmware upgrade state traps support on the Switch:
DGS-1210-28MP/ME:5# enable snmp firmware_upgrade_state traps
Command: enable snmp firmware_upgrade_state traps
Success.
DGS-1210-28MP/ME:5#

disable snmp firmware_upgrade_state traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SNMP firmware upgrade state traps support on the Switch:
DGS-1210-28MP/ME:5# disable snmp firmware_upgrade_state traps
Command disable enable snmp firmware_upgrade_state traps
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
The disable snmp IMPB_violation traps command enables SNMP
IMPB violation traps support on the Switch.
None.
Only Administrator or operator-level users can issue this command.
To enable SNMP firmware upgrade state traps.
enable snmp firmware_upgrade_state traps
The enable snmp firmware_upgrade_state traps command
enables SNMP firmware upgrade state traps support on the Switch.
After enables the SNMP firmware upgrade state traps support, the
Switch will send out a trap to the SNMP manage host when the
firmware upgrade is succeed or fail.
None.
Only Administrator or operator-level users can issue this command.
To disable SNMP firmware upgrade state traps.
disable snmp firmware_upgrade_state traps
The disable snmp firmware_upgrade_state traps command
disables SNMP firmware upgrade state traps support on the Switch.
None.
Only Administrator or operator-level users can issue this command.
116