Command: show dos_prevention land_attack
DoS Type
State
Action
Frame Counts
DGS-1210-28MP/ME:5#
enable dos_prevention trap_log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable a DoS prevention trap/log:
DGS-1210-28MP/ME:5# enable dos_prevention trap_log
Command: enable dos_prevention trap_log
Success.
DGS-1210-28MP/ME:5#
disable dos_prevention trap_log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable a DoS prevention trap/log:
DGS-1210-28MP/ME:5# disable dos_prevention trap_log
Command: disable dos_prevention trap_log
Success.
DGS-1210-28MP/ME:5#
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
: Land Attack
: Enabled
: Drop
: -
Used to enable a DoS prevention trap/log.
enable dos_prevention trap_log
The enable dos_prevention trap_log command is used to send
traps and logs when a DoS attack event occurs. The event will be
logged only when the action is specified as drop.
None.
Only administrator or operate-level users can issue this command.
Used to disable a DoS prevention trap/log.
disable dos_prevention trap_log
The disable dos_prevention trap_log command is used to disable
a DoS prevention trap/log.
None.
Only administrator or operate-level users can issue this command.
60