Show Mac_Protection - D-Link DGS-1210/ME Series Reference Manual

Restrictions
Example usage:
To delete the MAC protection with MAC 11:22:33:44:aa:0b on the Switch:
DGS-1210-28MP/ME:5# delete mac_protection 00:00:11:22:aa:bb mask ffffffffffff
Command: delete mac_protection 00:00:11:22:aa:bb mask ffffffffffff
Success.
DGS-1210-28MP/ME:5#

show mac_protection

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the MAC protection information on the Switch:
DGS-1210-28MP/ME:5# show mac_protection
Command: show mac_protection
MAC Address
----------------------------------------------------
00-00-11-22-aa-bb
11-22-33-44-aa-0b
Total Entries : 2
DGS-1210-28MP/ME:5#
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
{<macmask 000000000000-ffffffffffff>} – Specify the MAC mask for
the MAC address to be deleted.
all – Specify all MAC addresses for MAC protection to be deleted.
Only Administrator or operator-level users can issue this command.
Used to display the MAC protection information on the Switch.
show mac_protection
The show mac_protection command is used to display the MAC
protection information on the Switch.
N/A.
N/A.
MAC Mask
ff-ff-ff-ff-ff-ff
11-22-ff-ff-ff-aa
305