Show 802.1P Default_Priority; Config Scheduling_Mechanism - D-Link DGS-1210/ME Series Reference Manual

Parameters
Restrictions
Example usage:
To configure 802.1p default priority on the Switch:
DGS-1210-28MP/ME:5# config 802.1p default_priority all 4
Command: config 802.1p default_priority all 4
Success.
DGS-1210-28MP/ME:5#

show 802.1p default_priority

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current port 1-5 802.1p default priority configuration on the Switch:
DGS-1210-28MP/ME:5# show 802.1p default_priority 1-5
Command: show 802.1p default_priority 1-5
Port Default Priority Effective Priority
----- ---------------------- -------------------------
1
2
3
4
5
DGS-1210-28MP/ME:5#

config scheduling_mechanism

Purpose
Syntax
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
priority value an untagged, incoming packet is assigned before being
forwarded to its destination.
<portlist> − A port or range of ports to be configured.
all − Specifies that the config 802.1p default_priority command
applies to all ports on the Switch.
<priority 0-7> − The 802.1p priority value that an untagged, incoming
packet is granted before being forwarded to its destination.
Only administrator or operator level users can issue this command.
To display the currently configured 802.1p priority value that is
assigned to an incoming, untagged packet before being forwarded to
its destination.
show 802.1p default_priority {<portlist>}
The show 802.1p default_priority command displays the currently
configured 802.1p priority value that is assigned to an incoming,
untagged packet before being forwarded to its destination.
<portlist> − A port or range of ports to be displayed.
None.
0 4
0 4
0 4
0 4
0 4
To configure the scheduling mechanism for the QoS function.
config scheduling_mechanism [strict | wrr | 1st7wrr | 2st6wrr]
215