Delete Trusted_Host; Enable Snmp Traps - D-Link DGS-3100 Series Cli Manual

DGS-3100 Gigabit Ethernet Switch Manual
Description
Parameters
Restrictions
Exampl e usage:
To display the list

delete trusted_host

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a trusted host with an IP address 10.48.74.121:

enable snmp traps

Purpose
Syntax
Description
Parameters
Restrictions
The show trusted_host command displays a list of trusted hosts
entered on the Switch using the create
above.
<ipaddr> − The IP address of the trusted host.
None.
of trusted hosts:
D GS3100# show trusted_host
Managemen t Stations
IP Address
-------------------- ---
10.48.74.121
Total Ent ries: 1
DGS3 100 #
To delete a trusted host entry made using the create trusted_host
command above.
delete trusted_host <ipaddr>
The delete trusted_host
made using the create trusted
<ipaddr> − The IP address of the trusted host.
Only administrator-level users can issue this command.
DGS3100# delete trusted_host 10.48.74.121
Success.
DGS3100 #
To ena ble SNMP trap support.
enable snmp traps
The enable snmp traps command enables S
the Switch.
None.
Only administrator-level users can issue this command.
command deletes a trusted host entry
_host command above.
42
trusted_host command
NMP trap support on