Clear Counters; Save Log; Clear Log - D-Link DGS-1210/ME Series Reference Manual

Five Seconds - 7 % One Minute - 6 % Five Minutes - 6 %
CPU Utilization :
-------------------------------------------------------------------------------
Five Seconds - 7 % One Minute - 6 % Five Minutes - 6 %
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
DGS-1210-28MP/ME:5#

clear counters

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the counters:
DGS-1210-28MP/ME:5# clear counters
Success.
DGS-1210-28MP/ME:5#

save log

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the log information:
DGS-1210-28MP/ME:5# save log
Command: save log
Success.
DGS-1210-28MP/ME:5#

clear log

Purpose
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To clear the Switch's statistics counters.
clear counters{ports <portlist>}
The clear counters command clears the counters used by the
Switch to compile statistics.
ports <portlist> - Specifies the counters of ports to be cleared.
Only Administrator or operator-level users can issue this command.
To save the Switch's history log.
save log
The save log command saves the Switch's history log.
None.
Only Administrator or operator-level users can issue this command.
To clear the Switch's history log.
156