Show Snmp Global State; Show Snmp Groups - D-Link DGS-1210/ME Series Reference Manual

Restrictions
Example usage:
To delete the SNMP group named 'sg1':
DGS-1210-28MP/ME:5# delete snmp group sg1 v3 auth_priv
Command: delete snmp group sg1 v3 auth_priv
Success.
DGS-1210-28MP/ME:5#

show snmp global state

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP global state on the Switch:
DGS-1210-28MP/ME:5# show snmp global state
Command: show snmp global state
SNMP Global State : Enable
DGS-1210-28MP/ME:5#

show snmp groups

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP groups on the Switch:
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
characters.
Only administrator, operate or power user-level users can issue this
command.
To display the global state of SNMP currently configured on the
Switch.
show snmp global state
The show snmp global state command displays the global state of
SNMP groups currently configured on the Switch.
None.
Only administrator-level users can issue this command.
To display the group-names of SNMP groups currently configured
on the Switch. The security model, level, and status of each group
are also displayed.
show snmp groups
The show snmp groups command displays the group-names of
SNMP groups currently configured on the Switch. The security
model, level, and status of each group are also displayed.
None.
None.
98