Mld Snooping Commands - D-Link DGS-1210/ME Series Reference Manual

The MLD Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
enable mld_snooping
disable mld_snooping
config mld_snooping
create mld_snooping
multicast_vlan
config mld_snooping
multicast_vlan
show mld_snooping
multicast_vlan
delete mld_snooping
multicast_vlan
config mld_snooping
multicast_vlan_group
show mld_snooping
multicast_vlan_group
config mld_snooping
mrouter_ports
config mld_snooping
mrouter_ports_forbidden
config mld_snooping
querier
config mld_snooping
data_driven_learning
clear mld_snooping
data_driven_group
show mld snooping
show mld_snooping
forwarding
show mld_snooping
group
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Parameter
{multicast_vlan | forward_mcrouter_only}
{multicast_vlan | forward_mcrouter_only}
[vlan_name < string 32> | vlanid <vidlist> | all] {fast_done [enable | disable] |
host_timeout <sec 130-153025> | leave_timer <sec 1-25> | report_suppression
[enable | disable] | router_timeout <sec 60-600> | state [enable | disable]}
<vlan_name 32> <vlanid 2-4094>
<vlan_name 32> {[add | delete] [member_port <portlist> | [source_port <portlist>
| untag_source_port <portlist>] | tag_member_port <portlist>] | state [enable |
disable] | replace_source_ipv6 <ipv6addr> | remap_priority [<value 0-7> | none]
{ replace_priority}}
<vlan_name 32>
[<vlan_name 32> | all]
<vlan_name 32>
[add | delete] ipv6_range <ipv6addr> <ipv6addr>
{<vlan_name 32>}
[vlan_name <string 32> | vlanid <vidlist> | all] [add | delete] <portlist>
[vlan_name <string 32> | vlanid <vidlist> | all] [add | delete] <portlist>
[vlan_name <string 32> | vlanid <vidlist> | all] [last_listener_query_interval <sec
1-25> | max_response_time <sec 10-25> | query_interval <sec 60-600> |
robustness_variable | state [enable | disable] | version <value 1-2>]
[max_learned_entry <value 1-1024>| vlan_name <string 32> | vlanid <vidlist> |
all] [age_out [disable | enable] | expiry_time <sec 130-1530255> | state [enable |
disable]]
[vlan_name <string> | vlanid <vidlist> | all] {<ipv6_addr> | all}
[vlan_name <string 32> | vlanid <vidlist> | all]
[vlan_name <string 32> | vlanid <vidlist> | all]
[vlan_name <string 32> | vlanid <vidlist> | all | ports <portlist>]

MLD SNOOPING COMMANDS

346
45