Delete Snmp User - D-Link DGS-1210/ME Series Reference Manual

Restrictions
Example usage:
To create an SNMP user on the Switch:
DGS-1210-28MP/ME:5# create snmp user dlink SW22 v3 MD5 1234 DES jklj22
Command: create snmp user dlink SW22 v3 MD5 1234 DES jklj22
Success.
DGS-1210-28MP/ME:5#

delete snmp user

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously created SNMP user on the Switch:
DGS-1210-28MP/ME:5# delete snmp user dlink v3
Command: delete snmp user dlink v3
Success.
DGS-1210-28MP/ME:5#
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
• SHA − Specifies that the HMAC-SHA-96 authentication level
will be used.
•
<priv_password 32> - A string of between 1 and 32
alphanumeric characters used to authorize the agent to
receive packets for the host.
•
<auth_password 40> - A string of exactly 40 alphanumeric
characters, in hex form, to define the key used to authorize
the agent to receive packets for the host.
• DES − Specifies that the DES authentication level will be
used.
•
<priv_password 40> - A string of between 1 and 40
alphanumeric characters used to authorize the agent to
receive packets for the host.
encrypted by_key – Requires the SNMP user to enter an encryption
key for authentication and privacy. The key is defined by specifying
the key in hex form.
Only administrator, operate or power user-level users can issue this
command.
To remove an SNMP user from an SNMP group and also to delete
the associated SNMP group.
delete snmp user <username 32> [v1 | v2c | v3]
The delete snmp user command removes an SNMP user from its
SNMP group and then deletes the associated SNMP group.
<username 32> − A string of up to 32 alphanumeric characters that
identifies the SNMP user to be deleted.
Only administrator, operate or power user-level users can issue this
command.
89