Show Flow_Meter - D-Link DGS-1210/ME Series Reference Manual

DGS-1210-28MP/ME:5# config flow_meter profile_id 1 access_id 1 rate 64 burst_size 10
rate_exceed remark_dscp 2
Command: config flow_meter profile_id 1 access_id 1 rate 64 burst_size 10 rate_exceed
remark_dscp 2
Success.
DGS-1210-28MP/ME:5#

show flow_meter

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display flow meter information:
DGS-1210-28MP/ME:5# show flow_meter
Command: show flow_meter
Flow Meter information:
-------------------------------------
Total Flow Meter Entries: 0
DGS-1210-28MP/ME:5#
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To display the flow meter information on the Switch.
show flow_meter {profile_id <value 1-6> | access_id <value 1-
250>}
The show
information on the Switch.
profile_id <value 1-6> - .Specify the profile id to be displayed.
access_id <value 1-250> - Specify the access id to be displayed.
None.
flow_meter command displays the flow meter
490