Config Erps Instance Tc_Propagation; Config Erps Instance Raps_Vlan - D-Link DGS-1210/ME Series Reference Manual

Restrictions
Example usage:
To configure the instance ID 1 to connect to a sub-ring:
DGS-1210-28MP/ME:5# config erps instance 1 add sub_ring_instance 2
Command: config erps instance 1 add sub_ring_instance 2
Success.
DGS-1210-28MP/ME:5#

config erps instance tc_propagation

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable topology change propagation on instance 2 for sub-ring instance 1:
DGS-1210-28MP/ME:5# config erps instance 1 tc_propagation to instance 2 state
enable
Command: config erps instance 1 add sub_ring_instance 2
Success.
DGS-1210-28MP/ME:5#

config erps instance raps_vlan

Purpose
Syntax
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
instance from the connected another ring instance.
sub_ring_instance <value 1-16> – Specifies the sub ring instance ID
to be configured.
Only Administrator, operator and power user-level users can issue
this command.
Used to configure the state of the topology change propagation for
the sub-ring instance.
config erps instance <value 1-16> tc_propagation to instance
<value 1-16> state [enable | disable]
The config erps instance tc_propagation commanmd is used to
configure the state of the topology change propagation for the sub-
ring instance.
<value 1-16> – Specifies the instance ID to be configured.
tc_propagation to instance <value 1-16> – Specifies the instance.
state [enable | disable] – Specifies to enable or disable the
propagation state of the topology change for the sub-ring. The
default value is disabled.
Only Administrator, operator and power user-level users can issue
this command.
Used to configure instance raps VLAN.
config erps instance <value 1-16> raps_vlan <vlanid 1-4094>
250