ACCESS AUTHENTICATION CONTROL COMMANDS
The Access Authentication Control commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command
create authen_login
method_list_name
config authen_login
delete authen_login
method_list_name
show authen_login
show authen_policy
create authen_enable
method_list_name
config authen_enable
delete authen_enable
method_list_name
show authen_enable
enable authen_policy
disable authen_policy
config authen application
show authen application
config authen parameter
show authen parameter
create authen server_host
config authen server_host
delete authen server_host
show authen server_host
create authen server_group
config authen server_group
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Parameter
<string 15>
[default | method_list_name <string 15>] method [tacacs+ | radius |
local | server_group <string 15> | none]
<string 15>
[all | default | method_list_name <string 15>]
<string 15>
[default | method_list_name <string 15>] method {tacacs+ | radius |
local | server_group <string 15> | none}
<string 15>
[all | default | method_list_name <string 15>]
{console | http | ssh | telnet | all] [login | enable] [default |
method_list_name <string 15>]
[attempt <int 1-255> | response_timeout <int 0-255>]
[<ipaddr> | ipv6address <ipv6addr>] protocol [radius | tacacs+]
{ acct_port <int 1-65535> | port <int 1-65535> | key [<string 254> |
encryption_key <string 800> | none] | timeout <int 1-255> | retransmit
<int 1-255>}
[<ipaddr> | ipv6address <ipv6addr>] protocol [tacacs+ | radius]
{acct_port <int 1-65535> | port <int 1-65535> | encryption_key <string
800> | key [<string 254> | none] | timeout <int 1-255> | retransmit <int
1-255>}
[<ipaddr> | ipv6address <ipv6addr>] protocol [tacacs+ | radius]
<string 15>
[<string 15> | radius | tacacs+] [add | delete] server_host [<ipaddr> |
435
60