Disable Jumbo_Frame; Show Jumbo_Frame; Show Serial_Port - D-Link DGS-1210/ME Series Reference Manual

disable jumbo_frame

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable jumbo_frames:
DGS-1210-28/ME:5# disable jumbo_frame
Command: disable jumbo_frame
Success.
DES-1210-52/ME:5#

show jumbo_frame

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the jumbo_frames configuration status on the device:
DGS-1210-28MP/ME:5# show jumbo_frame
Command: show jumbo_frame
Jumbo frame is enable.
Success.
DGS-1210-28MP/ME:5#

show serial_port

Purpose
Syntax
Description
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To disable jumbo frames on the device.
disable jumbo_frame
The disable jumbo_frame command disables jumbo frames on the
device.
None.
Only Administrator or operate-level users can issue this command.
Jumbo frames will be disabled after save and restart.
To display the jumbo frame configuration.
show jumbo_frame
The show jumbo_frame command displays the jumbo frame
configuration.
None.
None.
Used to display the current serial port settings.
show serial_port
The show serial_port command displays the current serial port
settings.
17