Port Security Commands; Config Port_Security - D-Link DGS-1210/ME Series Reference Manual

Metro ethernet switches
Hide thumbs Also See for DGS-1210/ME Series:
Table of Contents

Advertisement

The Port Security commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command

config port_security

show port_security
delete
port_security_entry
clear
port_security_entry
Each command is listed in detail, as follows:
config port_security
Purpose
Syntax
Description
Parameters
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide

PORT SECURITY COMMANDS

Parameter
[<portlist> | all] [admin_state [enable | disable] | max_learning_addr
<max_lock_no 0-64> | lock_address_mode [Permanent | DeleteOnTimeout |
DeleteOnReset]
{ports <portlist>}
[vlan <vlan_name 32> | vlanid <vlanid 1-4094>] mac_address <macaddr>
[all | port <portlist>]
To configure port security settings.
config port_security [<portlist> | all] [admin_state [enable |
disable] | max_learning_addr <max_lock_no 0-64> |
lock_address_mode [Permanent | DeleteOnTimeout |
DeleteOnReset]
The config port_security command configures port security
settings for specific ports.
<portlist> – A port or range of ports to be configured.
all – Configures port security for all ports on the Switch.
admin_state [enable | disable] – Enables or disables port security for
the listed ports.
max_learning_addr <int 0-64> - Specify the max learning address.
The range is 0 to 64.
1-64 Limits the number of MAC addresses dynamically listed in the
FDB for the ports.
lock_address_mode – Defines the TBD and contains the following
options:
Permenant – Learns up to the maximum number of dynamic
addresses allowed on the port. The learned addresses are
not aged out or relearned on other port for as long as the
port is locked.
DeleteOnReset – Deletes the current dynamic MAC
addresses associated with the port. Learn up to the
maximum addresses allowed on the port (this number is
also configurable). Aging is disabled; the addresses are
deleted on reset
DeleteOnTimeout – Deletes the current dynamic MAC
addresses associated with the port. The port learns up to
383
48

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents