Success.
DGS-1210-28MP/ME:5#
show igmp_snooping static_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the IGMP snooping static group information on the Switch:
DGS-1210-28MP/ME:5# show igmp_snooping static_group vlan default
Command: show igmp_snooping static_group vlan default
VLAN ID/Name
----------------------
1
default
Total Entries : 1
DGS-1210-28MP/ME:5#
config igmp_snooping data_driven_learning
Purpose
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To display the IGMP snooping static group information on the
Switch.
show igmp_snooping statis_group vlan <vlan_name 32> | vlanid
<vlanid_list> | <ipaddr>}
The show igmp_snooping statis_group command displays the
IGMP snooping static group information on the Switch.
<vlan_name 32> − The name of the VLAN for which IGMP snooping
static group to be displayed.
<vlanid_list> − The VLAN id of IGMP snooping static group to be
displayed.
<ipaddr> − Specify the IP address of IGMP snooping static group to
be displayed.
None.
IP Address
----------------
226.1.1.1
To enable or disable the data driven learning of an IGMP snooping
group.
When data-driven learning is enabled for the VLAN, when the Switch
receives the IP multicast traffic on this VLAN, an IGMP snooping
group will be created. That is, the learning of an entry is not
activated by IGMP membership registration, but activated by the
traffic. For an ordinary IGMP snooping entry, the IGMP protocol will
take care of the aging out of the entry. For a data-driven entry, the
entry can be specified not to be aged out or to be aged out by the
aged timer.
Static Member Ports
---------------------------------
None
324