Erps Commands - D-Link DGS-1210/ME Series Reference Manual

The Ethernet Ring Protection Switching (ERPS) commands in the Command Line Interface (CLI) are listed
(along with the appropriate parameters) in the following table.
Command
enable erps
diable erps
create erps raps_vlan
config erps raps_vlan
config erps raps_vlan
config erps raps_vlan
config erps raps_vlan
config erps raps_vlan
config erps raps_vlan
config erps raps_vlan
config erps raps_vlan
config erps raps_vlan
delete erps raps_vlan
show erps
config erps log
config erps trap
create erps ring
config erps ring
config erps ring
config erps ring
config erps ring
show erps ring
delete erps ring
config erps instance
config erps instance
config erps instance
config erps instance
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Parameter
<vlanid 1-4094>
<vlanid 1-4094> ring_mel <value 0-7>
<vlanid 1-4094> ring_port [west [<port> | virtual_channel] | east [<port> |
virtual_channel]]
<vlanid 1-4094> [rpl_port [west | east | none] | rpl_owner [enable | disable]]
<vlanid 1-4094> protected_vlan [add | delete] vlanid <vidlist>
<vlanid 1-4094> timer [holdoff_time <integer 0-1000> | guard_time <integer 10-
2000> | wtr_time <integer 1-12>]
<vlanid 1-4094> state [enable | disable]
<vlanid 1-4094> [add | delete] sub_ring raps_vlan <vlanid 1-4094>
sub_ring raps_vlan <vluaid 1-4094> tc_propagation state [enable | disable]
<vlanid 1-4094> revertive [enable | disable]
<vlanid 1-4094>
{[raps_vlan <valnid 1-4094>] {sub_ring}}
[enable | disable]
[enable | disable]
<string 32>
<string 32> ring_id <value 1-239>
<string 32> [add | delete] instance <value 1-16>
<string 32> ring_type [major_ring | sub_ring]
<string 32> ring_port [west [<port> | virtual_channel] | east [<port> |
virtual_channel]]
<string 32>
<string 32>
<value 1-16> state [enable | disable]
<value 1-16> [add | delete] sub_ring_instance <value 1-16>
<value 1-16> tc_propagation to instance <value 1-16> state [enable | disable]
<value 1-16> raps_vlan <vlanid 1-4094>

ERPS COMMANDS

234
31