Show Lldp Statistics; Show Lldp Power_Pse_Tlv - D-Link DGS-1210/ME Series Reference Manual

show lldp statistics

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the LLDP statistics for port 15:
DGS-1210-28MP/ME:5# show lldp statistics ports 15
Command: show lldp statistics ports 15
Port ID : 15
-------------------------------------------------------------------
lldpStatsTxPortFramesTotal
lldpStatsRxPortFramesDiscardedTotal : 0
lldpStatsRxPortFramesErrors
lldpStatsRxPortFramesTotal
lldpStatsRxPortTLVsDiscardedTotal
lldpStatsRxPortTLVsUnrecognizedTotal : 0
lldpStatsRxPortAgeoutsTotal
DGS-1210-28MP/ME:5#

show lldp power_pse_tlv

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the LLDP power PSE status:
DGS-1210-28MP/ME:5# show lldp power_pse_tlv
Command: show lldp power_pse_tlv
Port
--------------------------------------
1 Disable
2 Disable
3 Disable
4 Disable
DGS-1210-28MP/ME:5#
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To display the Link Layer Discovery Protocol (LLDP) statistics for the
specified ports.
show lldp statistics {ports <portlist>}
The show lldp statistics command displays the statistics of LLDP
on the Switch.
ports <portlist> – Specifies the ports to be displayed.
None.
To display the Link Layer Discovery Protocol (LLDP) powers.
show lldp power_pse_tlv
The show lldp power_pse_tlv command displays the power of
LLDP on the Switch.
None.
None.
State
: 0
: 0
: 0
: 0
: 0
475