Show Stp Instance - D-Link DGS-1210/ME Series Reference Manual

Description
Parameters
Restrictions
Example usage:
To show stp port 1 on switch one:
DGS-1210-28MP/ME:5# show stp ports 1
Command: show stp ports 1
MSTP
----------------------------------------------------------------
Port Index:1 , Port STP:Enabled ,
External PathCost : 19 ,
Port RestrictedRole:False ,
Port Priority:128 ,
MSTI DGSignated Bridge
------- --------------------------
0 80:00:00:B2:FD:DA:EE:EB 200000
DGS-1210-28MP/ME:5#

show stp instance

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the STP instance configuration on the Switch:
DGS-1210-28MP/ME:5# show stp instance
Command: show stp instance
## CIST
Designated Root Bridge 00:00:00:00:00:00
Regional Root Bridge
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
The show stp ports command displays the STP Instance Settings
and STP Instance Operational Status currently implemented on the
Switch.
<portlist> – A port or range of ports to be configured. The port list is
specified by listing switch number and the beginning port number on
that switch, separated by a colon. Then the highest port number of
the range is specified. The beginning and end of the port list range
are separated by a dash.
None.
Port Information
Edge Port:Auto ,
Port RestrictedTCN:False
Port Forward BPDU:Enabled ,
To display the Switch's STP instance configuration
show stp instance {<value 1-63>}
The show stp instance command displays the Switch's current
STP Instance Settings and the STP Instance Operational Status.
<value 1-63> - The value of the previously configured instance_id on
the Switch. The value may be between 1 and 63.
None.
We are the Root for CST
Port 0
00:00:00:00:00:00
Path cost 0
P2P:Auto ,
Internal PathCost Prio Status
----------------------- ----
128 Disabled Disabled
Priority 0
, path cost 0
Priority 0
178
Role
---------- ----------