Enable Snmp Traps; Disable Snmp Traps - D-Link DGS-3200 SERIES Cli Manual

7-10 enable snmp traps

Purpose
Used to enable SNMP trap support.
Format
enable snmp traps
Description
The enable snmp traps command is used to enable SNMP trap support on the switch.
Parameters
None.
Restrictions
You must have administrator privileges.
Example
To enable SNMP trap support:
D G S - 3 2 0 0 - 1 0 : 4 # e n a b l e s n m p t r a p s
C o m m a n d : e n a b l e s n m p t r a p s
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

7-11 disable snmp traps

Purpose
Used to disable SNMP trap support on the switch.
Format
disable snmp traps
Description
The disable snmp traps command is used to disable SNMP trap support on the switch.
Parameters
None.
Restrictions
You must have administrator privileges.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
89