Ssl Commands; Enable Ssl - D-Link DGS-1210/ME Series Reference Manual

The SSL commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command

enable ssl

disable ssl
show ssl
download ssl certificate
Each command is listed in detail, as follows:
enable ssl
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SSL on the Switch for all ciphersuites:
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Parameter
{ciphersuite [DH-RSA-3DES-SHA1 | DH-RSA-DES-SHA1 | RSA-3DES-SHA1 |
RSA-DES-SHA1 | RSA-EXP1024-DES-SHA1 | RSA-NULL-MD5 | RSA-NULL-
SHA1]}
{ciphersuite [DH-RSA-3DES-SHA1 | DH-RSA-DES-SHA1 | RSA-3DES-SHA1 |
RSA-DES-SHA1 | RSA-EXP1024-DES-SHA1 | RSA-NULL-MD5 | RSA-NULL-
SHA1]}
[<ipaddr> | <ip6_addr>] certfilename <path_filename 64>
To enable the SSL function on the Switch.
enable ssl {ciphersuite [DH-RSA-3DES-SHA1 | DH-RSA-DES-
SHA1 | RSA-3DES-SHA1 | RSA-DES-SHA1 | RSA-EXP1024-DES-
SHA1 | RSA-NULL-MD5 | RSA-NULL-SHA1]}
The enable ssl command enables SSL on the Switch by
implementing every combination of listed ciphersuites on the Switch.
Entering this command enables the SSL status on the Switch.
Enabling SSL disables the web-manager on the Switch.
ciphersuite - A security string that determines the exact
cryptographic parameters, specific encryption algorithms and key
sizes to be used for an authentication session. The user may choose
any combination of the following:

DH-RSA-3DES-SHA1

DH-RSA-DES-SHA1

RSA-3DES-SHA1

RSA-DES-SHA1

RSA-EXP1024-DES-SHA1

RSA-NULL-MD5

RSA-NULL-SHA1
The ciphersuites are enabled by default on the Switch, yet the SSL
status is disabled by default. Enabling SSL with a ciphersuite will not
enable the SSL status on the Switch.
Only administrator-level users can issue this command.

SSL COMMANDS

432
59