Show Gvrp Timer; Enable Vlan_Trunk - D-Link DGS-1210/ME Series Reference Manual

5 1
6 1
7 1
8 1
Total Entries : 4
DGS-1210-28MP/ME:5#

show gvrp timer

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display GVRP timer information:
DGS-1210-28MP/ME:5# show gvrp timer
Command: show gvrp timer
Garp Timer Info (in milli seconds)
---------------------------------------
Join-time
-----------
100
DGS-1210-28MP/ME:5#

enable vlan_trunk

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable vlan_trunk on the switch:
DGS-1210-28MP/ME:5#enable vlan_trunk
Command: enable vlan_trunk
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Enable Enable
Enable Enable
Enable Enable
Enable Enable
To display the GVRP timer information on the Switch.
show gvrp timer
The show gvrp command displays the GVRP timer on the Switch.
None.
None.
Leave-time Leave-all-time
---------- --------------
600 10000
To enable VLAN trunking on the switch.
enable vlan_trunk
The enable vlan_trunk command, along with the disable
vlan_trunk command below, is used to enable and disable VLAN
trunking on the Switch, without changing the VLAN trunking
configuration on the ports.
None.
Only administrator or operator-level users can issue this command.
All Frames
All Frames
All Frames
All Frames
270