Enable Address_Binding Dhcp_Pd_Snoop; Disable Address_Binding Dhcp_Pd_Snoop - D-Link DGS-1210/ME Series Reference Manual

Restrictions
Example usage:
To display DHCP snoop of address binding max entries of port 1~5 on the Switch:
DGS-1210-28MP/ME:5# show address_binding dhcp_snoop max_entry ports 1-5
Command: show address_binding dhcp_snoop max_entry ports 1-5
Port Max Entry Max IPv6 Entry
---- --------------- ----------------------
1 No Limit
2 No Limit
3 No Limit
4 No Limit
5 No Limit
DGS-1210-28MP/ME:5#

enable address_binding dhcp_pd_snoop

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable address binding DHCPv6 PD Snooping on the Switch:
DGS-1210-28MP/ME:5# enable address_binding dhcp_pd_snoop
Command: enable address_binding dhcp_pd_snoop
Success.
DGS-1210-28MP/ME:5#

disable address_binding dhcp_pd_snoop

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable address binding DHCPv6 PD Snooping on the Switch:
DGS-1210-28MP/ME:5# disable address_binding dhcp_pd_snoop
Command: disable address_binding dhcp_pd_snoop
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
ports <portlist> – Specifies the ports on the device to be displayed.
None.
No Limit
No Limit
No Limit
No Limit
No Limit
Used to enable address binding DHCPv6 PD Snooping.
enable address_binding dhcp_pd_snoop
This enable address_binding dhcp_pd_snoop command is used
to enable IP-MAC-port binding DHCPv6 PD snooping.
None.
Only administrator or operate-level users can issue this command.
Used to disable address binding DHCPv6 PD Snooping.
disable address_binding dhcp_pd_snoop
This disable address_binding dhcp_pd_snoop command is used
to disable IP-MAC-port binding DHCPv6 PD snooping.
None.
Only administrator or operate-level users can issue this command.
81