Command: show scheduling_mechanism
QOS Scheduling_mechanism
scheduling_mechanism : Strict Priority
DGS-1210-28MP/ME:5#
config [dscp | tos] mode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the DSCP mode:
DGS-1210-28MP/ME:5# config dscp mode
Command: config dscp mode
DSCP mode success.
Success.
DGS-1210-28MP/ME:5#
config dscp_mapping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the DSCP mapping with value 10 and class 1:
DGS-1210-28MP/ME:5# config dscp_mapping dscp_value 10 class 1
Command: config dscp_mapping dscp_value 10 class 1
Success.
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To enable setting the DSCP or ToS mode on the Switch.
config [dscp | tos] mode
The config [dscp | tos] mode command enables the DSCP or ToS
mode on the Switch.
None.
None.
To enable setting the DSCP User Priority.
config dscp_mapping dscp_value <value 0-63> class <priority
0-7>
The config dscp_mapping command enables mapping the DSCP
value (the priority) to a specific queue (the class_id).
<value 0-63> –The selected value of priority. The value may be
between 0 and 63.
<priority 0-7> – The class_id (queue) mapped to the priority. The
value may be between 0 and 7.
Only administrator or operator-level users can issue this command.
217