Config 802.1X Guest_Vlan Ports; Show 802.1X Guest_Vlan - D-Link DGS-1210/ME Series Reference Manual

DGS-1210-28MP/ME:5# delete 802.1x guest_vlan default
Command: delete 802.1x guest_vlan default
Success.
DGS-1210-28MP/ME:5#

config 802.1x guest_vlan ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure ports to the Guest VLAN
DGS-1210-28MP/ME:5# config 802.1x guest_vlan ports 1-5 state enable
Command: config 802.1x guest_vlan ports 1-5 state enable
Success.
DGS-1210-28MP/ME:5#

show 802.1x guest_vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Guest VLAN configuration information:
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Defines a port or range of ports to be members of the Guest VLAN.
config 802.1x guest_vlan ports [<portlist> | all] state [enable |
disable]
The config 802.1x guest_vlan ports command defines a port or
range of ports to be members of the 802.1x Guest VLAN. The
802.1x Guest VLAN can be be configured to provide limited network
access to authorized member ports. If a member port is denied
network access via port–based authorization, but the 802.1x Guest
VLAN is enabled, the member port receives limited network access.
For example, a network administrator can use the 802.1x Guest
VLAN to deny internal network access via port–based
authentication, but grant Internet access to unauthorized users.
<portlist> – A port or range of ports to be configured to the Guest
VLAN.
All – Indicates all ports to be configured to the guest vlan.
state [enable | disable] – Specifies the guest vlan port is enabled or
disabled of the switch.
Only Administrator or operator–level users can issue this command.
Displays configuration information for the Guest VLAN.
show 802.1x guest_vlan
The show 802.1x guest_vlan command displays the Guest VLAN
name, state, and member ports.
None.
None.
379