Config Time_Range; Show Time_Range - D-Link DGS-1210/ME Series Reference Manual

config time_range

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the time range on the Switch:
DGS-1210-28MP/ME:5# config time_range timr1 hours start_time 12:00 end_time 00:00
date from_day year 2016 month 7 date 19 to_day year 2017 month 7 date 30
Command: config time_range timr1 hours start_time 12:00 end_time 00:00 date
from_day year 2016 month 7 date 19 to_day year 2017 month 7 date 30
Success.
DGS-1210-28MP/ME:5#

show time_range

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To configure the time range on the Switch.
config time_range
<start_time 32> end_time <end_time 32> weekdays <daylist 32>
date from_day year <start_year 2011-2029> month <start_mth 1-
12> date <start_date 1-31> to_day year <end_year 2011-2029>
month <end_mth 1-12> date <end_date 1-31>] | delete]
The config time_range command defines time ranges for access
lists. If the end time is earlier than the start time, the end time will
move to the following day
<range_name 20> – Specifies the time range name. The range of
characters is 1 - 20.
start_time <start_time 32> – defines the time on which the time
range will start to be active.
end_time <end_time 32 >– defines the time on which the time range
will stop to be active.
weekdays <daylist 32> – defines the days of the week on which the
time range will be active.
<start_year 2009-2037 > – Specifies the time range start year.
<start_mth 1-12> – Specifies the time range start month.
<start_date 1-31> – Specifies the time range start date.
<end_year 2009-2037 > – Specifies the time range end year.
<end _mth 1-12> – Specifies the time range end month.
<end _date 1-31> – Specifies the time range end date.
delete – Delete the time range settings.
Only Administrator or operator-level users can issue this command.
To display the currently configured access profiles on the Switch.
show time_range {<range_name 20>}
The show time_range command displays the time range
configuration.
<range_name 20> – Specifies the time range name to be displayed.
None.
<range_name 20>
32
[[hours start_time