Config Erps Ring Ring_Port - D-Link DGS-1210/ME Series Reference Manual

Description
Parameters
Restrictions
Example usage:
To configure the ring "ring2 as a sub-ring:
DGS-1210-28MP/ME:5# config erps ring ring2 ring_type sub_ring
Command: config erps ring ring2 ring_type sub_ring
Success.
DGS-1210-28MP/ME:5#

config erps ring ring_port

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the ring port to be virtual channel of west for ring "ring2:
DGS-1210-28MP/ME:5# config erps ring ring2 ring_port west virtual_channel
Command: config erps ring ring2 ring_port west virtual_channel
Success.
DGS-1210-28MP/ME:5#
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
The config erps ring ring_type commanmd is used to specify the
ring type of a physical ring.
<string 32> - Specify the ring to be configured.
ring_type [major_ring | sub_ring] - Specifies the ERPS ring as a
major-ring or sub-ring. By default, the ERPS ring is major-ring.
Only Administrator, operator and power user-level users can issue
this command.
Used to configure ring port parameter for a specific physical ring.
config erps ring <string 32> ring_port [west [<port> |
virtual_channel] | east [<port> | virtual_channel]]
The config erps ring ring_port commanmd is used to configure
ring port parameter for a specific physical ring.
<string 32> - Specify the ring to be configured.
west [<port> | virtual_channel] – Specifies the port to be added to
and ERPS ring west. Or specifies west port virtual channel to
indicate that the interconnect node is a local node endpoint of and
sub_ring.
east [<port> | virtual_channel] – Specifies the port to be added to
and ERPS ring east. Or specifies west port virtual channel to
indicate that the interconnect node is a local node endpoint of and
sub_ring.
Only Administrator, operator and power user-level users can issue
this command.
247