Config Erps Ring Instance; Config Erps Ring Ring_Type - D-Link DGS-1210/ME Series Reference Manual

Syntax
Description
Parameters
Restrictions
Example usage:
To configure the ring value 2 of the ring "ring2:
DGS-1210-28MP/ME:5# config erps ring ring2 ring_id 2
Command: config erps ring ring2 ring_id 2
Success.
DGS-1210-28MP/ME:5#

config erps ring instance

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the ring value 2 of the ring "ring2:
DGS-1210-28MP/ME:5# config erps ring ring2 add instance 2
Command: config erps ring ring2 add instance 2
Success.
DGS-1210-28MP/ME:5#

config erps ring ring_type

Purpose
Syntax
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
config erps ring <string 32> ring_id <value 1-239>
The config erps ring ring_id commanmd is used to configure the
ring ID of a specific physical ring.
<string 32> - Specifies the name for a specified physical ring.
ring_id <value 1-239> - Specifies the identifier of a physical ring. The
valid range is from 1 to 239.
Only Administrator, operator and power user-level users can issue
this command.
Used to add or delete the instance ID of the ring ID of a physical
ring.
config erps ring <string 32> [add | delete] instance <value 1-16>
The config erps ring instance commanmd is used to add or delete
the instance ID of the ring ID of a physical ring.
<string 32> - Specify the ring to be configured.
[add | delete] - Specifies the instance which specified of the ring to
be added or deleted.
instance <value 1-16> - Specifies the instance ID to be configured.
Only Administrator, operator and power user-level users can issue
this command.
Used to configure the ring type of a physical ring.
config erps ring <string 32> ring_type [major_ring | sub_ring]
246