Config Mac_Based_Access_Control Log Max_Users; Create Mac_Based_Access_Control_Local Mac_Address - D-Link DGS-1210/ME Series Reference Manual

To disable log state of MAC-based Access Control:
DGS-1210-28MP/ME:5# config mac_based_access_control log state disable
Command: config mac_based_access_control log state disable
Success.
DGS-1210-28MP/ME:5#

config mac_based_access_control log max_users

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To specify the maximum users of MAC-based Access Control:
DGS-1210-28MP/ME:5# config mac_based_access_control max_users 100
Command: config mac_based_access_control max_users 100
Success.
DGS-1210-28MP/ME:5#

create mac_based_access_control_local mac_address

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a local database entry:
DGS-1210-28MP/ME:5# create mac_based_access_control_local mac_address 00-11-
22-33-44-55 vlanid 1
Command: create mac_based_access_control_local mac_address 00-11-22-33-44-55
vlanid 1
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To configure the maximum users of MAC-based Access Control.
config mac_based_access_control max_users <value 1-1000>
The config mac_based_access_control log state command is
used to configure the maximum users of MAC-based Access
Control.
<value 1-1000> - .Specifies the maximum users of MAC-based
Access Control. The range is between 1 and 1000.
Only administrator or operator-level users can issue this command.
To create the local database entry.
create mac_based_access_control_local mac_address
<mac_addr> vlanid <int 1-4094>
The create
command is used to create a database entry.
<mac_addr> - .Specifies MAC address that accesses accept by
local mode.
vlanid <int 1-4094> - Specifies the MAC address of the specified
VLAN ID to be created.
Only administrator or operator-level users can issue this command.
mac_based_access_control_local
282
mac_address