Show Pvid Auto_Assign; Create Mac_Based_Vlan Mac_Address - D-Link DGS-1210/ME Series Reference Manual

Syntax
Description
Parameters
Restrictions
Example usage:
To disable the auto-assign PVID:
DGS-1210-28MP/ME:5# disable pvid auto_assign
Command: disable pvid auto_assign
Success.
DGS-1210-28MP/ME:5#

show pvid auto_assign

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the auto-assign PVID state:
DGS-1210-28MP/ME:5# show pvid auto_assign
Command: show pvid auto_assign
PVID Auto-assignment: Enabled
DGS-1210-28MP/ME:5#

create mac_based_vlan mac_address

Purpose
Syntax
Description
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
disable pvid auto_assign
The disable pvid auto_assign command disables the auto-assign
of PVID. When it is disabled, PVID only be changed by PVID
configuration (user changes explicitly). The VLAN configuration will
not automatically change PVID. The default setting is enabled.
None.
Only Administrator, Operator and Power-User-level users can issue
this command.
To show auto assignment of PVID.
show pvid auto_assign
The show pvid auto_assign command is used to show PVID auto-
assigment state.
None.
None.
To create a static MAC-based VLAN entry.
create mac_based_vlan mac_address <macaddr> [vlan
<vlan_name 32> | vlanid <vlanid 1-4094> | mask[<000000000000
- ffffffffffff>]
This command only needs to be supported by the model which
supports MAC-based VLAN.
The user can use this command to create a static MAC-based VLAN
entry.
When a MAC-based VLAN entry is created for a user, the traffic
from this user will be able to be serviced under the specified VLAN
regardless of the authentiucation function operated on this port.
There is a global limitation of the maximum entries up to 1024 for the
static MAC-based entry.
274