Delete Iproute; Show Iproute - D-Link DGS-1210/ME Series Reference Manual

To add a default route with a nexthop of 10.90.58.33 as primary route:
DGS-1210-28MP/ME:5# create iproute default 10.90.58.33 primary
Command: create iproute default 10.90.58.33 primary
Success.
DGS-1210-28MP/ME:5#

delete iproute

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the default route from the routing table:
DGS-1210-28MP/ME:5# delete iproute 10.90.58.33
Command: delete iproute 10.90.58.33
Success.
DGS-1210-28MP/ME:5#

show iproute

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Used to delete an IP route entry from the Switch's IP routing table.
delete iproute [<network_address> | default] <ipaddr>
The delete iproute command will delete an existing IP route entry
from the Switch's IP routing table.
<network_address> – To specify the IPv4 address that is the
destination of the route to be deleted.
default – Specifies to delete a default IP route entry.
<ipaddr> – To specify the IPv4 address for the next hop router to be
configured.
Only Administrator, operator and power user-level users can issue
this command.
Used to display the Switch's current IP routing table.
show iproute {static}
The show iproute command will display the Switch's current IP
routing table.
{static} – Specifies to display all the static route entries.
None.
337