Config Gratuitous_Arp Send Periodically Ipif - D-Link DGS-1210/ME Series Reference Manual

Gratuitous ARP Periodical Send Interval : 0
DGS-1210-28MP/ME:5#

config gratuitous_arp send periodically ipif

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure gratuitous ARP intervals for the Switch:
DGS-1210-28MP/ME:5# config gratuitous_arp send periodically ipif ip2 interval 100
Command: config gratuitous_arp send periodically ipif ip2 interval 100
Success.
DGS-1210-28MP/ME:5#
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Used to configure the interval for periodical sending of gratuitous
ARP request packets.
config gratuitous_arp send periodically ipif <ipif_name 12>
interval <integer 0-65535>
The config gratuitous_arp send periodically ipif command is
used to configure the interval for periodical sending of gratuitous
ARP request packets. By default, the interval is 0.
<ipif_name 12> - Specifies the IP interface name to be configured.
<integer 0-65535> − Periodically send gratuitous ARP interval time
in seconds. 0 means it will not send gratuitous ARP periodically.
Only Administrator or operator-level users can issue this command.
147