To configure the interval of sFlow counter poller port 1 to be 0:
DGS-1210-28MP/ME:5# config sflow counter_poller ports 1 interval disable
Command: config sflow counter_poller ports 1 interval disable
Success.
DGS-1210-28MP/ME:5#
delete sflow counter_poller ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete sFlow counter poller on port 1:
DGS-1210-28MP/ME:5# delete sflow counter_poller ports 1
Command: delete sflow counter_poller ports 1
Success.
DGS-1210-28MP/ME:5#
show sflow counter_poller
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Used to delete the sFlow counter poller from the specified port.
delete sflow counter_poller ports [<portlist> | all]
The delete sflow counter_poller ports command is used to delete
the sFlow counter poller from the specified port.
[<portlist> | all] – Specify the list of ports or all ports to delete the
counter poller.
Only Administrator, operator and power user-level users can issue
this command.
Used to display the sFlow counter pollers which have been
configured for port.
show sflow counter_poller
The show sflow counter_poller command is used to display the
sFlow counter pollers which have been configured for port.
None.
None.
409