Show 802.1P User_Priority; Config 802.1P Default_Priority - D-Link DGS-1210/ME Series Reference Manual

Restrictions
Example usage:
To configure 802.1 user priorityon the Switch:
DGS-1210-28MP/ME:5# config 802.1p user_priority 2 0
Command: config 802.1p user_priority 2 0
Success.
DGS-1210-28MP/ME:5#

show 802.1p user_priority

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show 802.1p user priority:
DGS-1210-28MP/ME:5# show 802.1p user_priority
Command: show 802.1p user_priority
QOS Class of Traffic
Priority-0 -> <Class-1>
Priority-1 -> <Class-2>
Priority-2 -> <Class-1>
Priority-3 -> <Class-3>
Priority-4 -> <Class-4>
Priority-5 -> <Class-5>
Priority-6 -> <Class-6>
Priority-7 -> <Class-7>
DGS-1210-28MP/ME:5#

config 802.1p default_priority

Purpose
Syntax
Description
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
to 7) to map to the 802.1p priority value specified above.
Only administrator or operator level users can issue this command.
To display the current mapping between an incoming packet's
802.1p priority value and one of the Switch's eight hardware priority
classes of service.
show 802.1p user_priority
The show 802.1p user_priority command displays the current
mapping of an incoming packet's 802.1p priority value to one of the
Switch's four hardware priority queues.
None.
None.
To assign an 802.1p priority tag to an incoming untagged packet that
has no 802.1p priority tag.
config 802.1p default_priority [<portlist> | all] <priority 0-7>
The config 802.1p default_priority command specifies the 802.1p
214