Enable Dhcp_Relay; Disable Dhcp_Relay - D-Link DGS-1210/ME Series Reference Manual

Command
option_18
config dhcpv6_relay
option_37
config dhcpv6_relay
option_38
show dhcpv6_relay
option_38
Each command is listed in detail, as follows:

enable dhcp_relay

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable DCHP Relay on the Switch:
DGS-1210-28MP/ME:5# enable dhcp_relay
Command: enable dhcp_relay
Success.
DGS-1210-28MP/ME:5#

disable dhcp_relay

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable DHCP Relay on the Switch:
DGS-1210-28MP/ME:5# disable dhcp_relay
Command: disable dhcp_relay
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Parameter
vendor1]]
[check [enable | disable] | remote_id [cid_with_user_define <string 128> | default
| user_define <string 128>] | state]
ports <portlist> [state [enable | disable] | subscriber_id [default | user_define
<string 128>]]
{ports <portlist>}
To enable DHCP Relay server on the Switch
enable dhcp_relay
The enable dhcp_relay command sets the DHCP Relay to be
globally enabled on the Switch and on all existing VLANs.
None.
Only Administrator, operator or power user-level users can issue this
command.
To disable DHCP Relay server on the Switch
disable dhcp_relay
The disable dhcp_relay command sets the DHCP Relay to be
globally disabled on the Switch and on all existing VLANs.
None.
Only Administrator, operator or power user-level users can issue this
command.
129