Show Flash Information - D-Link DGS-1210/ME Series Reference Manual

To display the configuration file and firmware image assigned as a boot up file:
DGS-1210-28MP/ME:5# show boot_file
Command: show boot_file
Bootup Firmware : image_1
Bootup Configuration : config_1
DGS-1210-28MP/ME:5#

show flash information

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the flash information of the Switch:
DGS-1210-28MP/ME:5# show flash information
Command: show flash information
Flash ID
Flash size : 32MB
Partition
Boot
Image1
Image2
FileSystem 331776
DGS-1210-28MP/ME:5# show flash information
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Used to display the flash information of the Switch.
show flash information
The show flash information command is used to display the flash
information of the Switch.
None.
None.
: MX25L25635E
Used Available
1310720 0
12357664 1798112
12337184 1818592
3600384
Use%
0
87
87
8
127