show igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show igmp snooping:
DGS-1210-28MP/ME:5# show igmp_snooping vlan default
Command: show igmp_snooping vlan default
IGMP Snooping Global State
Multicast Router Only
Data Driven Learning Max Entries : 64
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Querier State
Querier Role
Querier Select
Querier IP
Querier Expiry Time
State
Fast Leave
Version
Data Driven Learning Aged Out
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL
show igmp_snooping group
Purpose
Syntax
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To show the current status of IGMP snooping on the Switch.
show igmp_snooping {vlan <vlan_name 32> | vlanid <vidlist> |
multicast_vlan <vlan_name 32> | multicast_vlan_group
<vlan_name 32>}
The show igmp_snooping command displays the current IGMP
snooping configuration on the Switch.
<vlan_name 32> − The name of the VLAN for which IGMP snooping
configuration is to be displayed. Up to 32 characters can be used.
<vidlist> − The vid of the VLAN for which IGMP snooping
configuration is to be displayed.
None.
To display the current IGMP snooping group configuration on the
Switch.
show igmp_snooping group [vlan <vlan_name 32> | vlanid
<vidlist>] <ipaddr> {data_driven}
: Disable
: Disable
: default
: 1
: 10
: 2
: 1
: Disable
: Non-Querier
: Disable
: 10.90.90.90
: 0
: Enable
: Disable
: 3
: Disable
330