Enable Igmp_Snooping; Disable Igmp_Snooping - D-Link DGS-1210/ME Series Reference Manual

4 Disabled
5 Disabled
DGS-1210-28MP/ME:5#

enable igmp_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable IGMP snooping on the Switch:
DGS-1210-28MP/ME:5# enable igmp_snooping
Command: enable igmp_snooping
Success.
DGS-1210-28MP/ME:5#

disable igmp_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
TTo disable IGMP snooping on the Switch:
DGS-1210-28MP/ME:5# disable igmp_snooping
Command: disable igmp_snooping
Success.
DGS-1210-28MP/ME:5#
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To enable IGMP snooping on the Switch.
enable igmp_snooping {multicast_vlan |
forward_mcrouter_only}
The enable igmp_snooping command enables IGMP snooping on
the Switch.
{multicast_vlan | forward_mcrouter_only} − Enables the multicast
VLAN or forward mcrouter for IGMP Snooping on the Switch.
Only administrator or operator-level users can issue this command.
To disable IGMP snooping on the Switch.
disable igmp_snooping {multicast_vlan |
forward_mcrouter_only}
The disable igmp_snooping command disables IGMP snooping on
the Switch. IGMP snooping can be disabled only if IP multicast
routing is not being used. Disabling IGMP snooping allows all IGMP
and IP multicast traffic to flood within a given IP interface.
{multicast_vlan | forward_mcrouter_only} − Disables the multicast
VLAN or forward mcrouter for IGMP Snooping on the Switch.
Only Administrator or operator-level users can issue this command.
329