Delete Ipif; Enable Ipif; Disable Ipif - D-Link DGS-1210/ME Series Reference Manual

delete ipif

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an IP interface:
DGS-1210-28MP/ME:5# delete ipif all
Command: delete ipif all
Success.
DGS-1210-28MP/ME:5#

enable ipif

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable all IP interface:
DGS-1210-28MP/ME:5# enable ipif all
Command: enable ipif all
Success.
DGS-1210-28MP/ME:5#

disable ipif

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable all IP interface:
DGS-1210-28MP/ME:5# disable ipif all
Command: disable ipif all
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To delete an IP interface on the switch.
delete ipif [<ipif_name 12> | all]
The delete ipif command will delete an IP interface.
[<ipif_name 12> | all] - Specifies the IP interface name or all IP
interface to be deleted.
Only Administrator or operator-level users can issue this command.
To enable an IP interface on the switch.
enable ipif [<ipif_name 12> | all]
The enable ipif command will create an IP interface.
[<ipif_name 12> | all] - Specifies the IP interface name or all IP
interface to be enabled.
Only Administrator or operator-level users can issue this command.
To disable an IP interface on the switch.
disable ipif [<ipif_name 12> | all]
The disable ipif command will create an IP interface.
[<ipif_name 12> | all] - Specifies the IP interface name or all IP
interface to be disabled.
Only Administrator or operator-level users can issue this command.
296