Front Wheel Hub Assembly And Steering Knuckle Components; Front Wheel Hub Assembly Removal And Installation - Suzuki GRAND VITARA Owner's Manual

Front Wheel Hub Assembly and Steering Knuckle Components

CAUTION
!
Never disassemble front wheel hub assembly. Disassembly will spoil its original function. If faulty
condition is found, replace it with new one.
3
(a)
1. Front wheel hub assembly
2. Steering knuckle
3. Drive shaft nut
: Calk, after tightening.
Front Wheel Hub Assembly Removal and
Installation
CAUTION
!
Never disassemble front wheel hub
assembly. Disassembly will spoil its original
function. If faulty condition is found, replace
it with new one.
Removal
1) Hoist vehicle and remove wheel.
2) Uncaulk drive shaft nut (1).
3) Depress foot brake pedal and hold it. Remove drive
haft nut (1).
1
4. Dust cover
5. Wheel hub housing bolt
: 200 N⋅m (20.0 kgf-m, 145.0 lb-ft)
S5JB0A2206007
2
4
4) Remove caliper (1) with carrier.
NOTE
Hang removed caliper with a wire hook or the
like (3) so as to prevent brake hose (4) from
bending, twisting or tension.Do not depress
brake pedal during pads removal.
Do not operate brake pedal with pads
removed.
Front Suspension:
S5JB0A2206006
(b)
5
I5JB0A220012-01
: 50 N⋅m (5.0 kgf-m, 36.0 lb-ft)
: Do not reuse.
I5JB0A220013-01
2B-9