Steering Knuckle And Wheel Hub - Suzuki GA413 Manual

STEERING KNUCKLE AND WHEEL HUB

: Do not reuse
: Tightening torque
REMOVAL
1) Remove drive shaft nut.
2) Hoist vehicle and remove wheel.
Remove wheel speed sensor for ABS (if equipped).
3) Remove caliper carrier bolts.
4) Remove caliper with carrier.
NOTE:
Hang removed caliper with a wire hook of the like so as to
prevent brake hose from bending and twisting excessively
or being pulled.
Don't operate brake pedal with pads removed.
5) Pull brake disc off by using two 8 mm bolts.
6) Pull out wheel hub with special tools.
Special Tool
(A): 09943-17912
(B): 09942-15511
FRONT SUSPENSION (4WD) 3D1-13
1. Steering knuckle
2. Wheel hub
3. Snap ring
4. Wheel bearing
5. Brake dust cover
6. Drive shaft nut
7. Wheel hub bolt