Suzuki Liana RH413 Service Manual page 29

When Using Floor Jack
WARNING
!
If the vehicle to be jacked up only at the front
or rear end, be sure to block the wheels on
ground in order to ensure safety.
After the vehicle is jacked up, be sure to
support it on stands. It is extremely
dangerous to do any work on the vehicle
raised on jack alone.
CAUTION
!
Never apply jack against suspension parts
(i.e., stabilizer, etc.) or vehicle floor, or it may
get deformed.
For 2WD vehicle
In raising front or rear vehicle end off the floor by jacking,
be sure to put the jack against the front end of the
engine mounting member (1) or rear suspension frame
(2).
For 4WD vehicle
In raising front or rear vehicle end off the floor by jacking,
be sure to put the jack against the jacking bracket (3) or
rear differential (4).
General Information:
[A]: 2WD vehicle front [D]: 4WD vehicle rear
[B]: 4WD vehicle front 5. Rear suspension frame
[C]: 2WD vehicle rear
0A-6
I2RH0B010001-01