6 Reference information
6.8. Special tools
Continued
C
E
F
G
H
I
Dismounting tool, bearing race, tilthouse shaft
The tool for removing the bearing race from the tilthouse shaft is assembled with the parts
shown in the figure below (included in the toolkit for service).
Note! The parts cannot be ordered separately, but are included in the complete toolkit! The
article numbers are given only for identification.
xx0600002657
A
B
C
D
E
G
M
274
Hex socket head cap screw, 9ADA183-25, 2 pcs, M6 x 25
Nut, 3HAC5507-1
Sleeve, 3HAC023963-027
Nut, 3HAC023963-028
Press sleeve, 3HAC023963-038
Connection rod, 3HAC025192-006
Hydraulic cylinder, 3HAC11731-1
Press washer, 3HAC023963-007
Hex socket head cap screw, 9ADA183-25, 2 pcs, M6 x 25
Connection rod, M16, length= 400 mm
Nut, 3HAC5507-1
Nut, 3HAC023963-028
Sleeve, 3HAC023963-037
Continues on next page
3HAC022032-001 Revision: E