Optional) Setting The Load Balancing Mode Of Ip Packet Forwarding - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
The system view is displayed.
Step 2 Run:
tcp timer syn-timeout interval
The timeout interval of the TCP SYN-Wait timer is set.
Step 3 Run:
tcp timer fin-timeout interval
The timeout interval of the TCP FIN-Wait timer (FIN_WAIT_2) is set.
Step 4 Run:
tcp window window-size
The size of the packet receive or transmit buffer is set.
----End
6.3.6 (Optional) Setting the Load Balancing Mode of IP Packet
Forwarding
Context
When flow-based load balancing mode is adopted, the S9300&S9300E performs the Hash
algorithm based on the protocol type, source IP address and mask, destination IP address and
mask, source port number, and destination port number, and then selects a route for forwarding
packets according to the Hash value.
By default, the flow-based load balancing mode is adopted.
Do as follows on the S9300&S9300E.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
load-balance flow [slot slot-id ]
The load balancing mode is configured for IP packet forwarding.
----End
Issue 01 (2012-03-15)
NOTE
Currently, the S9300&S9300E supports only the flow-based load balancing.
NOTE
The value of slot-id can only be 0. That is, on the S9300&S9300E, you can set the load balancing mode
for only the packets sent by the CPU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 IP Performance Configuration
120