Binding An Interface To A Dhcp Server Group - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
Context
Perform the following steps on the DHCP relay agent.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
dhcp server group group-name
A DHCP server group is created and the DHCP server group view is displayed.
A maximum of 64 DHCP server groups can be configured globally.
Step 3 Run:
dhcp-server ip-address [ ip-address-index ]
A DHCP server is added to the DHCP server group.
Up to 20 DHCP servers can be added to a DHCP server group. If you do not specify the server
index, the system allocates an idle index to the server.
Step 4 (Optional) Run:
vpn-instance vpn-instance-name
A VPN instance is bound to the DHCP server group.
----End

3.5.4 Binding an Interface to a DHCP Server Group

Multiple VLANIF interfaces can be bound to a DHCP server group; however, a VLANIF
interface can belong to only one DHCP server group. That is, the DHCP Request packets on a
VLANIF interface can be relayed to only one DHCP server group.
Context
Perform the following steps on the DHCP relay agent.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface vlanif vlan-id
The VLANIF interface view is displayed.
Step 3 Run:
dhcp relay server-select group-name
The VLANIF interface is bound to a DHCP server group.
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 DHCP Configuration
68